Ceph由于更换IP地址导致MON异常

引言

由于机器要更换IP地址,更改重启后,各ceph监控进程出现异常,无法启动,本文用于记录并说明该问题。

现象

更换IP地址后,直接启动mon无法启动,总是发现报绑定IP地址的错误。初步猜测为:
进程需要绑定本地的IP:PORT进行监听,地址已改,而绑定的还是修改前的地址,绑定失败,所以报错。

[root@gnop029-ct-zhejiang_wenzhou-16-20 ceph]# ./startmon.sh 
monmaptool: monmap file /etc/ceph/monmap
monmaptool: /etc/ceph/monmap exists, --clobber to overwrite
'/var/lib/ceph/mon/ceph-a' already exists and is not empty: monitor may already exist
=== mon.a === 
Starting Ceph mon.a on ceph-10...
2015-11-23 13:23:47.855887 7f4a5a36a7a0 -1 WARNING: 'mon addr' config option 101.71.4.20:6789/0 does not match monmap file
         continuing with monmap configuration
2015-11-23 13:23:47.856064 7f4a5a36a7a0 -1 accepter.accepter.bind unable to bind to 101.67.163.20:6789: (99) Cannot assign requested address
2015-11-23 13:23:47.856085 7f4a5a36a7a0 -1 accepter.accepter.bind was unable to bind. Trying again in 5 seconds 
2015-11-23 13:23:52.856281 7f4a5a36a7a0 -1 accepter.accepter.bind unable to bind to 101.67.163.20:6789: (99) Cannot assign requested address
2015-11-23 13:23:52.856319 7f4a5a36a7a0 -1 accepter.accepter.bind was unable to bind. Trying again in 5 seconds 
2015-11-23 13:23:57.856622 7f4a5a36a7a0 -1 accepter.accepter.bind unable to bind to 101.67.163.20:6789: (99) Cannot assign requested address
2015-11-23 13:23:57.856657 7f4a5a36a7a0 -1 accepter.accepter.bind was unable to bind after 3 attempts: (99) Cannot assign requested address
2015-11-23 13:23:57.856670 7f4a5a36a7a0 -1 unable to bind monitor to 101.67.163.20:6789/0
failed: 'ssh ceph-10 ulimit -n 32768;  /usr/bin/ceph-mon -i a --pid-file /var/run/ceph/mon.a.pid -c /etc/ceph/ceph.conf --cluster ceph '

解决办法

修改ceph.conf配置文件,并重新生成monmap文件,即可启动mon进程

重新生成monmap文件

sudo monmaptool --create --generate -c /etc/ceph/ceph.conf /etc/ceph/monmap

也可以通过命令得到新的monmap

monmaptool --create --add mon.a 101.71.4.20:6789 --add mon.b 101.71.4.21:6789 \
  --add mon.c 101.71.4.22:6789   --add mon.d 101.71.4.23:6789    --add mon.e 101.71.4.24:6789 		--fsid c6e7e7d9-2b91-4550-80b0-6fa46d0644f6 \
  --clobber monmap

按照上述办法,即可解决IP地址修改导致监控进程无法启动的问题。

未经允许不得转载:SuperMan's blog » Ceph由于更换IP地址导致MON异常

评论 0

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址